Smart Battery System 2 blocks 50 AH

Smart Battery System upgrade package – HY-TEC 50 / 2-block 50 Ah

The Etrusco Smart Battery System combines 2 different battery types (AGM und LI). This enables the advantages of both technologies to be exploited, thus significantly increasing the durability of the batteries. Although considerably smaller in size and weight, the usable capacity is a exactly the same.

Operating principle:

1. Prioritised charging of AGM battery

2. Complete charging of HY-TEC 50 LI battery

3. Discharging of HY-TEC 50 LI battery

4. Discharging of AGM battery (buffer storage)

Advantages of product:

Exclusive product – perfectly adapted for Etrusco vehicles

Increased lifespan from Ø approx. 3 years to approx. 10 years

Weight saving of approx. 20 Kg while LI battery measures 1/3 of the external dimensions of an AGM battery with the same usable capacity as 2 x 95Ah AGM batteries

 Existing charging technology (EBL and battery charger, if any) remains unaffected thanks to intelligent battery management

Winter- ready system: Major advantages, especially in minus temperatures as the AGM battery starts to charge immediately while the integrated heating warms the HY-TEC 50 LI battery to a temperature of 10°C to enable rapid charging.

Environmentally friendly: The existing AGM batteries do not need to be disposed of and can continue to be used*.

Impoved safety: The HY-TEC 50 LI battery is a lithium iron phosphate battery (LiFePO4). This means there is no risk of overheating or combustion.

Improved charging: Begins to draw current immediately when the motor starts and throughout the entire journey à no reaction time due to the starting curve of the chemical process in AGM batteries

Improved economy: A relatively inexpensive introduction to the world of LI batteries as the existing AGM battery can continue to be used*.

Perfect upgrade expansion: The HY-TEC 50 2-block is an excellent choice for customers who want to retrofit a 2nd battery to increase the available capacity. Compared to retrofitting with another AGM battery, the existing lead battery can continue to be used and does not need to be replaced*. Also perfect as a replacement for AGM batteries.

Flexible: If required, the system can also be expanded with one or more HY-TEC 50 2-blocks; this can also be done in stages. The HY-TEC 50 LI battery can be installed anywhere in the vehicle; thanks to it slim design it can also be fitted in smaller alcoves.

Robust overall system: The tried and tested lead battery in combination with the HY-TEC 50 LI battery provides outstanding performance across a wide temperature range. In comparison to pure lithium batteries it can even be charged in temperatures below 0°C.

Certified quality:  The HY-TEC 50 LI battery is ECE approved has been tested by the TÜV for temperature fluctuations and vibrations.

Made in Germany: The HY-TEC 50 LI battery is manufactured in Germany. 

Dimensions: (H) 175 mm x (L) 229 mm x (W) 122 mm

Weight: 6.8 kg

Package contains: 1 x LI battery (2 blocks), 1 x 2-way connection cable for AGM battery, 1 x cable set, 1 x operating instructions, 1 x fuse 30 A

The Etrusco Battery System must be assembled by your Etrusco contract partner. For further information, please contact your Etrusco contract partner.

Optional extra: Display set

*provided this is not completely defective, your Etrusco dealer will advise you on this